Especially for light-coloured wooden flooring – for a finish without the permanent wet effect!
Hartwachs-Öl Effekt Natural is suitable for the protection and the nearly invisible surface finishing of light-coloured wood in indoor areas, such as wooden flooring and furniture surfaces.
Light-coloured wood stays light-coloured
Nearly invisible protection, no “permanent wet effect”
Suitable for wood and microporous
Resistant to saliva and perspiration, suitable for children’s toys
Resistant to coffee, wine and cola
Can sizes: 0.75 L; 2.5 L; 25 L
1 litre covers approx. 30 m2 with one coat.
Finished surface in 2 days, 2 coats
(1st Hartwachs-Öl Effekt Natural, 2nd Hartwachs-Öl Clear)
First coat on the raw, sanded wood approx. 30 ml/m².
Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
Drying time approx. 24 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
If desired, the dried finish can be smoothened with fine grain sandpaper (P400) or with a Scotchpad before applying the second coat.
Second coat approx. 35 ml/m² with Hartwachs-Öl Clear.
Drying time approx. 8 –10 hours; see point 3.